Tundra 2WD V6-4.0L (1GR-FE) (2005)
1. RECONNECT THE NEGATIVE BATTERY CABLE
2. CHECK THE OPERATION OF THE PASSENGER AIRBAG INDICATOR LIGHT
(a) Sit in the front passenger seat.
(b) Turn the ignition switch to the ON position.
(c) Check that the passenger airbag indicator light on the integration control panel illuminates and indicates that the passenger airbag is "ON".
3. PERFORM A FUNCTION CHECK ON THE INTEGRATION CONTROL PANEL
(a) Make sure all knobs and buttons mounted on the integration control panel work correctly.
4. REPROGRAM THE RADIO STATION PRESETS
5. SET THE CLOCK TO THE APPROPRIATE TIME
VII. SSC Completion Label Installation
VII. SSC COMPLETION LABEL INSTALLATION
After completing the repair and before returning the vehicle to the owner, an SSC
completion label, which is enclosed in the owner's notification letter, must be affixed to the left front door hinge post, near the check strap.
(a) The label is to be filled out as follows: