Tundra 2WD V6-4.0L (1GR-FE) (2005)
4. Double cab (12 V):
INSPECT ACC RELAY AND ACC CUT RELAY CONTINUITY
If the continuity is not as specified, replace the switch.
5. Except double cab:
INSPECT POWER OUTLET RELAY (Marking: PWR OUTLET) CONTINUITY
If the continuity is not as specified, replace the switch.
6. Double cab (115 V):
INSPECT VOLTAGE INVERTER CIRCUIT
Disconnect the connector from the voltage inverter and check the connector on the wire harness side, as shown in the table.