Tundra 2WD V6-4.0L (1GR-FE) (2005)
2. DISCONNECT THE NEGATIVE BATTERY CABLE
B. REPLACE THE FRONT PASSENGER AIRBAG INDICATOR LENS
1. REMOVE THE INTEGRATION CONTROL PANEL
(a) Remove the 3 control knobs.
(b) Remove the 3 screws (1 screw behind each of the 3 control knobs).
(c) Remove the 2 screws (1 screw above each vent).
NOTE:
^ Be careful not to drop the 2 screws located above the vents when removing them.
^ Using a magnetic screwdriver will aid in the removal of these 2 screws.
(d) Remove the integration control panel by pulling at the positions indicated by the arrows in the illustration.
(e) Disconnect the 2 connectors.