Tundra 2WD V6-4.0L (1GR-FE) (2005)
NOTE:
The protective sheet covering the new indicator lens, may make the lens appear to have scratches on it when it does not.
6. REINSTALL THE INTEGRATION CONTROL PANEL PRINTED CIRCUIT BOARD (PCB)
(a) Reinstall the PCB.
(b) Reinstall the 2 screws.
7. REINSTALL THE INTEGRATION CONTROL PANEL BACK COVER
(a) Reinstall the back cover.
(b) Reinstall the 6 screws.
(c) Turn the integration control panel over to the front side and inspect the operation of all the buttons.
NOTE:
During this process, DO NOT place the integration panel facedown on a surface that can cause scratches.
8. REINSTALL THE INTEGRATION CONTROL PANEL