Tundra 2WD V6-4.0L (1GR-FE) (2005)
c. Standard cab:
Disconnect the pretensioner connector.
1. Remove the front door scuff plate.
2. Remove the front pillar garnish.
3. Remove the back panel upper garnish.
4. Remove the front seat outer belt floor anchor.
5. Remove the quarter trim.
6. Disconnect the pretensioner connector as shown in the illustration.
d. Access cab:
Disconnect the pretensioner connector.
1. Remove the front door scuff plate.
2. Remove the rear door scuff plate.
3. Remove the front seat outer belt floor anchor.
4. Remove the front seat outer belt shoulder belt.
5. Remove the roof side rail garnish.
6. Remove the front door rear scuff plate and cover.
7. Disconnector the pretensioner connector as shown in the illustration.
e. Double cab:
Disconnect the pretensioner connector.
1. Remove the front door scuff plate.
2. Remove the back door scuff plate.
3. Remove the lower center pillar garnish.
4. Disconnect the pretensioner connector as shown in the illustration.