Tundra 2WD V6-4.0L (1GR-FE) (2005)
c. Install the lower center pillar garnish.
d. Install the front seat outer belt floor anchor with the bolt.
Torque: 42 N.m (430 kgf.cm, 32 ft.lbf)
e. Install the rear door scuff plate with the 3 screws.
f.
Install the front door scuff plate with the 3 screws.
2. Access cab:
INSTALL FRONT SEAT OUTER BELT
a. Install the retractor of the front seat outer belt.
1. Install the retractor of the front seat outer belt with the 2 bolt.
Torque:
Upper: 8.5 N.m (87 kgf.cm, 75 in.lbf)
Lower: 42 N.m (430 kgf.cm, 32 ft.lbf)