Tundra 2WD V6-4.0L (1GR-FE) (2005)
1
Remove the stabilizer bar.
2
Using SST, replace the No. 2 spring bumper.
SST 09922-10010
HINT: At the time of installation, use a torque wrench with a fulcrum length of 345 mm (13.58 inch).
Torque: 23 Nm (235 kgf-cm, 17 ft. lbs.)
3
Install the stabilizer bar.
d. Install the front wheel.
Torque: 110 Nm (1,150 kgf-cm, 83 ft. lbs.)
Installation
FRONT LOWER SUSPENSION ARM