toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Relays and Modules - Body and Frame > < Components|Page 60
Page 1
background image

Parking Assist Control Module: Service and Repair
Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart  
  See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts

1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

(a) Install the clearance warning ECU to the bracket with the 2 nuts.

NOTICE:
*

Avoid any impact to the clearance warning ECU.

*

Do not drop the ECU. If it is dropped, replace it with a new one.

2. INSTALL CLEARANCE WARNING ECU WITH BRACKET

(a) Install the ECU with bracket with the nut and bolt.

(b) Connect the ECU connectors and attach the harness clamp.

NOTICE:
Do not apply excessive force to the wire harnesses.

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH   See: Body and Frame/Interior Moulding / Trim/Dashboard

/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY   See: Restraint Systems/Air Bag Systems/Air Bag/Service and

Repair/Removal and Replacement/Front Passenger Side Knee Airbag Assembly/Installation

5. INSTALL LOWER INSTRUMENT PANEL   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation

7. INSTALL INSTRUMENT SIDE PANEL RH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light    See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver Side

Knee Airbag Assembly/Installation.

Relays and Modules - Body and Frame > < Components|Page 60