Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-3004.png)
1. INSTALL GLASS BREAKAGE SENSOR ECU
a. Install the ECU with the nut.
b. Install the junction block with the 2 nuts.
c. Connect the connectors.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
a. for Column Shift Type: Remove the instrument panel finish panel.
b. for Floor Shift Type: Remove the instrument panel finish panel.
3. INSTALL INSTRUMENT SIDE PANEL LH
a. for Column Shift Type: Remove the instrument side panel.
b. for Floor Shift Type: Remove the instrument side panel.
4. INSTALL COWL SIDE TRIM BOARD LH
a. for Regular Cab: Install the cowl side trim board.
b. for Double Cab: Install the cowl side trim board.
