toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drivetrain - Transfer Case ECM Replacement Information|Page 552 > < Shift Interlock Control Module|Locations
Page 1
background image

Control Module: All Technical Service Bulletins
Drivetrain - Transfer Case ECM Replacement Information

T-SB-0090-08

June 9, 2008

4WD ECM Replacement with Transfer Case/Transfer Case 
Actuator Assembly Replacement

Service Category
Drivetrain

Section
Transfer/4wd/Awd

Market
USA

Applicability

Introduction

If the transfer case assembly or transfer case actuator assembly is replaced on some 2007 and 2008 model year Tundra vehicles the four wheel drive
(4WD) computer (ECM) may need to be replaced at the same time due to transfer case assembly and 4WD ECM logic changes. Refer to the procedure
below to confirm if replacement of the 4WD ECM will be required at the same time as the transfer case assembly or transfer case actuator assembly
replacement.

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from
the vehicle's in-service date.

^

Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Drivetrain - Transfer Case ECM Replacement Information|Page 552 > < Shift Interlock Control Module|Locations