Tundra Access Cab SR5 2WD V6-3.4L (5VZ-FE) (2000)
INSPECTION
1. VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check. *
2. VEHICLES INVOLVED IN COLLISION
a. Do a diagnostic system check. *
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following
items even if the airbag was not deployed:
-
Check the bracket deformation.
-
Check the paint peeling off the bracket.
-
Check the cracks, dents or chips in the case.
-
Check the cracks, dents, chipping and scratches in the connector.
-
Check the peeling off of the label or damage to the serial number.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT REQUIREMENTS
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision. (Replace both the left and right airbag sensors.)
-
If the front airbag sensor has been found to be faulty in troubleshooting.
-
If the front airbag sensor has been found to be faulty during checking items.
-
If the front airbag sensor has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the front airbag sensor.