Van Wagon 2WD L4-2237cc 2.2L (4Y-E) (1989)
6.
Remove cotter pin and nut from upper ball joint stud. Using suitable tool, disconnect ball joint from steering knuckle taking care not to damage
ball joint boot, and remove ball joint from arm.
7.
Remove bolts and upper control arm from frame.
8.
Bushings can be replaced using suitable tools.
9.
Reverse procedure to install, torque upper control arm front bolt, upper control arm rear bolt, ball joint to control arm bolts and ball joint to
steering knuckle to specifications.
Fig. 10 Removal & Installation Of Torsion Bar Spring
Fig. 11 Exploded View Of Front Suspension Components. 4WD