Venza AWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Using a plastic hammer, uniformly tap the 2 tail exhaust pipe baffle sub-assemblies onto the tail exhaust pipe assembly.
8. INSTALL NO. 2 ENGINE UNDER COVER
9. INSTALL NO. 1 ENGINE UNDER COVER
10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation
11. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
12. INSPECT FOR EXHAUST GAS LEAK