Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-754001.png)
Radiator Cooling Fan Motor Relay: Testing and Inspection
1AR-FE COOLING: RELAY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. COOLING FAN RELAY
(a) Remove the relay from the engine room relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.
(c) Install the relay to the engine room relay block.
2. NO. 2 COOLING FAN RELAY
(a) Remove the relay from the engine room relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.
(c) Install the relay.
3. NO. 3 COOLING FAN RELAY
