Venza FWD L4-2.7L (1AR-FE) (2009)
Test in Illustration
(b) Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle.
Test in Illustration
NOTICE:
-
If ATF comes out after removing the overflow plug, wait until the fluid flow slows and only drips come out.
-
If ATF comes out, it is not necessary to perform the initial filling procedure. After checking the tightening torque of the No. 1 transmission
oil filler tube, temporarily tighten the overflow plug.
(c) Using a 6 mm hexagon socket wrench, check that the No. 1 transmission oil filler tube is tightened to the specified torque.
Test in Illustration