Venza FWD L4-2.7L (1AR-FE) (2009)
![background image](/toyota/venza_fwd/l4-2.7l_(1ar-fe)/Page-978008.png)
HINT:
-
DTC communication uses the CAN communication system.
-
*2: The ECM is malfunctioning if only U0100 is output. Refer to Automatic Transaxle System (U760E: See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U0100, U760F: See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U0100, U660E: See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U0100, U660F: See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U0100).
(c) Main Body ECU (Instrument Panel Junction Block) / Techstream Display "Main Body"
HINT: DTC communication uses the CAN communication system.
(d) Power Steering ECU / Techstream Display "EPS"
HINT: DTC communication uses the CAN communication system.
(e) Air Conditioning Amplifier / Techstream Display "Air Conditioner"
HINT:
-
DTC communication uses the CAN communication system.
-
DTCs can be checked using the air conditioning control panel (DTC 99 is output).
(f) Combination Meter / Techstream Display "Combination Meter"
HINT: DTC communication uses the CAN communication system.
(g) Center Airbag Sensor Assembly / Techstream Display "SRS Airbag"
HINT: The center airbag sensor assembly is connected to the CAN communication system, but CAN communication DTCs are not output.