Venza FWD L4-2.7L (1AR-FE) (2009)
HINT:
-
DTC communication uses the CAN communication system.
-
"Power Management2" output DTC is communication error in power management bus.
(p) Power Back Door ECU (Back Door Motor Unit) / Techstream Display "Power Back Door"
HINT: The back door motor unit (power back door ECU) is connected to the CAN communication system, but CAN communication DTCs
are not output.
(q) Back Door Closer ECU / Techstream Display "Power Back Door"
HINT: The back door closer ECU is connected to the CAN communication system, but CAN communication DTCs are not output.
(r) AFS ECU / Techstream Display "AFS/HL AutoLeveling"
HINT: The AFS ECU is connected to the CAN communication system, but CAN communication DTCs are not output.
5. DTC COMBINATION TABLE
(a) CAN No. 1 Bus