Venza FWD L4-2.7L (1AR-FE) (2009)
![background image](/toyota/venza_fwd/l4-2.7l_(1ar-fe)/Page-981029.png)
NG -- REPLACE CAN NO. 2 JUNCTION CONNECTOR
OK -- Continue to next step.
22. CHECK FOR SHORT IN CAN BUS WIRES (CENTER AIRBAG SENSOR ASSEMBLY)
(a) Reconnect the center airbag sensor assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY
OK -- Continue to next step.
23. CHECK FOR SHORT IN CAN BUS WIRES (YAW RATE SENSOR)
(a) Reconnect the yaw rate sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration