Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1108001.png)
Accelerator Pedal: Service and Repair
Removal
1AR-FE ENGINE CONTROL: ACCELERATOR PEDAL: REMOVAL
REMOVAL
1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Disconnect the accelerator pedal sensor assembly connector.
(b) Remove the 2 bolts and accelerator pedal sensor assembly.
NOTICE:
-
Avoid physical shocks to the accelerator pedal sensor assembly.
-
Do not disassemble the accelerator pedal sensor assembly.
