Venza FWD L4-2.7L (1AR-FE) (2009)
Accelerator Pedal: Service and Repair
Installation
1AR-FE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION
INSTALLATION
1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Install the accelerator pedal sensor assembly with the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
NOTICE: Avoid physical shocks to the accelerator pedal sensor assembly.
(b) Connect the accelerator pedal sensor assembly connector.