Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2254007.png)
Text in Illustration
(d) Release the ball joint and remove the power back door rod.
23. REMOVE POWER BACK DOOR UNIT ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 bolts and power back door unit assembly.
Installation
DOOR / HATCH: POWER BACK DOOR DRIVE UNIT: INSTALLATION
1. INSTALL POWER BACK DOOR UNIT ASSEMBLY
(a) Install the power back door unit with the 4 bolts.
Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)
(b) Connect the connector.
2. INSTALL POWER BACK DOOR ROD