Venza FWD V6-3.5L (2GR-FE) (2010)
(a) When reusing the power back door rod:
(1) Install the 2 stop rings to the power back door rod.
(b) Engage the power back door rod.
(c) Install the power back door rod.
(d) Check that the power back door rod is engaged in the ball joint and that the power back door rod cannot be pulled out.
3. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
5. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat
Outer Belt Assembly/Installation
6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
7. INSTALL RECLINING REMOTE CONTROL BEZEL LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
8. INSTALL REAR SEAT ASSEMBLY LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for LH
Side)/Installation
9. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY See: Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
10. INSTALL REAR SEAT OUTER TRACK BRACKET COVER LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
11. INSTALL REAR SEAT INNER TRACK BRACKET COVER LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat