Venza FWD V6-3.5L (2GR-FE) (2010)
Replacement/Removal
9. REMOVE UPPER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
(a) Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.
(b) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner
connector as shown in the illustration.
HINT
Tape the screwdriver tip before use.
(c) Remove the bolt.
(d) Disengage the 2 guides and remove the front seat outer belt assembly.
11. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Remove the 2 bolts.
(b) Disengage the guide and remove the front shoulder belt anchor adjuster assembly.
Installation