Venza FWD V6-3.5L (2GR-FE) (2010)
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Engage the adjuster positioning hole with the guide and install the front shoulder belt anchor adjuster assembly with the 2 bolts.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
(a) Engage the 2 guides.
(b) Install the front seat outer belt assembly with the bolt.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(c) Connect the connector and lock the locking button as shown in the illustration.
NOTICE:
Securely lock the locking button.
(d) Connect the shoulder anchor of the front seat outer belt assembly with the nut.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL UPPER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and