Toothed belt-deflection pulley, remove and install
Toothed Belt Guide Rollers, Remove and Install
Remove, Disconnect
Remove toothed belt - see operation "Toothed Belt, Remove and Install".
Remove toothed belt guide pulley (1), intake side or toothed belt guide pulley (2), exhaust side from cylinder head.
Install, Connect
Install toothed belt guide pulley (1), intake side or toothed belt guide pulley (2), exhaust side at cylinder head - tightening torque 25 Nm/18 lbf. ft.
Install toothed belt - see operation "Toothed Belt, Remove and Install".
Important!
Toothed belt guide roller with larger diameter is installed on intake side.