Adjust crank drive (Models F08, F35, F48, F69,
F70)
Remove
Remove crank drive – see operation "Crank Drive, Remove
and Install (Models F08, F35, F48, F69, F70)".
Adjust
Turn crank drive clockwise to end stop (I).
Note: The crank drive
may block before the end stop. Locking pin (1) engages by moving
outwards. Then the locking pin (1) must be pressed down and the
crank drive must be turned further clockwise. At the end stop the
locking pin (1) does not engage.
Adjust
Turn crank drive anti-clockwise until the locking pin (1)
engages the first time. Turn crank drive further in this catch
anti-clockwise until the stop (II).
|
|
Adjust
Note: In the first
catch, the crank drive can be turned approx. three-quarters of a
revolution from one stop to the next.
Install
Crank drive
|