Coolant Pipe, Remove and Install
Remove
Remove radiator – see operation "Radiator, Remove and
Install (with Air Conditioning)" or "Radiator, Remove and Install
(without Air Conditioning)".
Detach wiring harness plug from oil temperature sensor and
unclip wiring harness (5) from bracket (4).
Detach coolant hose (8) from thermostat housing.
Detach coolant hose (2) from coolant pipe.
Unclip coolant hose (6) from bracket (7).
Remove fastening bolts (1) and (3) and remove coolant pipe.
|
|
Install
Insert coolant pipe and attach to cylinder block and
transmission casing. Coolant pipe to cylinder block –
tightening torque 35 Nm / 26 lbf. ft. Coolant pipe to manual
transmission – tightening torque 20 Nm / 15 lbf. ft. Coolant
pipe to automatic transmission – tightening torque 35 Nm / 26
lbf. ft.
Clip thermostat housing coolant hose in bracket.
Attach compensation tank coolant hose to coolant pipe.
Attach coolant hose to thermostat housing.
Attach wiring harness plug to oil temperature sensor and clip
wiring harness in bracket.
Install radiator – see operation "Radiator, Remove and
Install (with Air Conditioning)" or "Radiator, Remove and Install
(without Air Conditioning)".
Inspect
Charge and bleed cooling system – see operation "Cooling
System, Charge and Bleed" and "Cooling System, Check for
Leaks".
|