|
Coolant Temperature Sensor, Remove and Install
 Remove
|
Remove engine cover.
Disconnect wiring harness plug from coolant temperature sensor
(1).
Detach coolant temperature sensor from cylinder head –
collect coolant.
|
|
Install
Attach coolant temperature sensor to cylinder with new seal ring
– tightening torque 10 Nm / 7.5 lbf. ft.
Connect wiring harness plug to coolant temperature sensor.
Install engine cover.
Inspect
Charge cooling system – see operations "Cooling System,
Charge and Bleed" and "Cooling System, Check for Leaks".
|
