|
V-belt, Remove and Install
 Remove
|
Remove air cleaner housing with air intake hose and hot film
mass air flow meter – see illustration "Air Ducts".
For version with AC: Remove ribbed V-belts – see operation
"Ribbed V-belts, Remove and Install".
Remove fastening bolts (1) and remove alternator bracket.
Release locking bolt (2) and release V-belt tension at adjusting
nut (3).
Remove V-belt.
|
|
Install
Position V-belt on torsional vibration damper and alternator
pulley.
Tension V-belt with adjusting nut and secure alternator set
screw to tensioner blade – tightening torque 35 Nm / 26 lbf.
ft.
Check V-belt tension – see operation "V-belt Tension,
Check and Adjust".
Attach alternator bracket to alternator and turbocharger –
tightening torque – 18 Nm / 13 lbf. ft.
For version with AC: Install ribbed V-belt – see operation
"Ribbed V-belt, Remove and Install".
Install air cleaner housing with air intake hose and hot film
mass air flow meter – see illustration "Air Ducts".
|
