|
Ribbed V-belt Tensioner, Remove and Install
 Remove
|
Remove air cleaner housing with air intake hose and hot film
mass air flow meter – see illustration "Air Ducts".
Remove ribbed V-belts – see operation "Ribbed V-belts,
Remove and Install".
Remove lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Detach ribbed V-belt tensioner (1) from compressor support.
|
|
Install
Attach ribbed V-belt tensioner to compressor bracket –
tightening torque 25 Nm / 18 lbf. ft.
Install lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Install ribbed V-belt – see operation "Ribbed V-belt,
Remove and Install".
Install air cleaner housing with air intake hose and hot film
mass air flow meter – see illustration "Air Ducts".
|
