|
Remove air intake hose with air intake cover – see
illustration "Air Ducts (X 16 SZR)". Detach wiring harness plug (1)
from coolant temperature sensor. Detach coolant temperature sensor
(2) from intake manifold.
Install
Attach coolant temperature sensor with new seal ring to intake
manifold – tightening torque 20 Nm / 15 lbf. ft.
Connect wiring harness plug to coolant temperature sensor.
Install air intake hose with air intake cover – see
illustration "Air Ducts (X 16 SZR)".
Close coolant drain bolt.
Charge cooling system – see operations "Cooling System,
Charge and Bleed" and "Cooling System, Check for Leaks".
|
