Corrosion protection measures: seam seal
The seam seal is applied to the primed body during repair as in
production.
Summary of the symbols in the illustrations with
the corresponding application thicknesses
Symbol
|
Description
|
Thickness of coat
|
Part Number
|
Catalogue Number
|
Unit
|
A
|
No coating
|
|
|
|
|
B
|
Runout area
|
0.5 - 0.0 mm
|
|
|
|
C
|
Underbody protection
|
0.5 mm
|
09 163 309
|
15 00 371
|
1 L
|
D
|
Cavity protection wax
|
0.3 mm
|
09 169 462
|
15 06 801
|
1 L
|
E
|
Aggregate protective wax
|
0.3 mm
|
|
|
|
F
|
Seam seal
|
Thickness of bead 6-10 mm
|
90 093 639
|
15 04 520
|
310 ml
|
G
|
Protection from chippings
|
0.5 mm
|
09 121 538
|
15 00 367
|
500 ml
|
H
|
Closed film of wax
|
0.3 mm
|
09 121 548
|
15 00 369
|
300 ml
|
Overview of seam seals for floor group
|
1. |
Seal of connecting seams on floor group |
|
|
1. |
Seam seal on front wheel housing |
|
Bonnet
1. |
Sealing the connecting seams between the bonnet
panelling/bonnet frame |
|
|
Side panel (model L 35)
|
1. |
Sidewall reinforcement adhesive |
2. |
Seam seal at wheel arch flange edge |
3. |
Seam seal at tank filler pipe connection |
|
Side panel (model L 35)
|
1. |
Sealing the connecting seams on the tank port |
2. |
Sealing the connecting seams on the wheel arch
flange edge |
3. |
Sealing the connecting seams side panel/side panel
base extension |
4. |
Sealing the connecting seams side panel/rear light
insert |
|
Tank port (model L 48)
|
1. |
Sealing the connecting seams, tank port/side
panel |
2. |
No coatings |
3. |
No coatings |
|
Tank port (model L 35)
|
1. |
No coatings |
2. |
Sealing the connecting seams, tank port/side
panel |
3. |
No coatings |
4. |
Sealing the connecting seams, tank port/side
panel |
|
Side of floor (model L 48)
|
1. |
Sealing the connecting seams sill panelling/floor
group |
|
Front wheel housing
|
1. |
Sealing the connecting seams on the bulkhead side
of the sill panelling |
|
Front wheel housing (continued)
|
1. |
Seal of connecting seams on floor group |
|
Front wheel housing (continued)
|
1. |
Sealing the connecting seams in the front wheel
housing |
|
Left front structure
|
1. |
Sealing the connecting seams, front wheel
housing/front frame longitudinal member |
|
Right front structure
- Cross-sectional view, spring strut dome
|
1. |
Sealing the connecting seams, front wheel
housing/front frame longitudinal member |
2. |
Hole sealed |
3. |
Sealing the connecting seams on the front frame
longitudinal member |
4. |
No coatings |
|
Bulkhead
|
1. |
Sealing the connecting seams, bulkhead/windscreen
mounting |
2. |
No coatings |
|
Bulkhead (continued)
|
1. |
Sealing the connecting seams on the bulkhead |
|
Bulkhead (continued)
|
1. |
Sealing the connecting seams bulkhead/A-pillar |
|
Bulkhead (continued)
- Cross-sectional view of bulkhead
|
1. |
Sealing the connecting seams on the bulkhead |
|
Bulkhead (continued)
|
1. |
Sealing the connecting seams on the bulkhead |
|
Windscreen mounting
|
1. |
Apply sealant to the joint in the area of the
windscreen mounting |
2. |
Sealing the connecting seams on the A-pillar |
|
Rear right wheel housing (model L 48)
- Cross-sectional view of wheel housing
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Rear left wheel housing (model L 48)
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Rear left wheel housing (model L 48)
(continued)
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Rear wheel housing (model L48)
- Cross-sectional view of rear wheel housing
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Rear wheel housing (model L 48)
|
1. |
Sealing the connecting seams, rear wheel
housing/rear end panel |
|
Rear wheel housing (model L 48)
|
1. |
Sealing the connecting seams, rear wheel
housing/rear frame longitudinal member |
|
Rear wheel housing (model L 35)
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Rear wheel housing (model L 35)(continued)
|
1. |
Sealing the connecting seams, wheel housing/rear
frame longitudinal member |
|
Rear wheel housing (model L 35)(continued)
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Rear wheel housing (model L 35)(continued)
|
1. |
Sealing the connecting seams in the rear wheel
housing |
|
Recess for spare wheel (model L 48)
- Cross-sectional view, recess for spare wheel
|
1. |
Sealing the connecting seams, recess for spare
wheel/rear floor |
|
Rear end panel (model L 48)
|
1. |
Coat sealing seam in the area of the rubber
seal |
2. |
Sealing the connecting seams rear end panel/rear
light insert |
3. |
Sealing the connecting seams. rear end panel/anchor
plate |
4. |
Sealing the connecting seams on the rear end
panel |
5. |
Sealing the connecting seams, rear end panel/side
panel base extension |
|
Rear end panel (model L 35)
|
1. |
Coat sealing seam in the area of the rubber
seal |
2. |
Sealing the connecting seam, rear end panel/side
panel base extension |
3. |
Sealing the connecting seam, rear end panel |
4. |
Sealing the connecting seam rear end panel/rear
light insert |
|
Rear light insert (model L 48)
|
1. |
No coating |
2. |
Sealing the connecting seams rear light insert/side
panel |
3. |
Coat sealing seam in the area of the rubber
seal |
|
Coat sealing seams which are hidden by the rear light
Rear light insert (model L 35)
|
1. |
Sealing the connecting seams rear light insert/side
panel |
2. |
No coatings |
3. |
Sealing the connecting seams, rear light
insert/side panel base extension |
4. |
Coat sealing seam in the area of the rubber
seal |
|
Coat sealing seams which are hidden by the rear light
Side panel base extension (model L 48)
|
1. |
Sealing the connecting seams, side panel base
extension/side panel |
2. |
Sealing the connecting seams, side panel base
extension/rear end panel |
3. |
Sealing the connecting seams, side panel base
extension/rear light insert |
|
Front door hinge
|
1. |
Sealing the connecting seams, door
hinge/A-pillar |
|
Rear door hinge
|
1. |
Sealing the connecting seams, door
hinge/B-pillar |
|
Front door
|
1. |
Sealing the connecting seams, door frame/door
panelling |
2. |
Coat the seam in this area |
3. |
Coat the seam in this area |
4. |
Coat the seam in this area |
5. |
Coat the seam in this area |
|
Rear door (model L 48)
|
1. |
Coat seam in this area |
2. |
Sealing the connecting seams, door frame/door
panelling |
3. |
Coat the seam in this area |
4. |
Coat the seam in this area |
5. |
Coat the seam in this area |
|
Rear door (model L 35)
|
1. |
Coat seam in this area |
2. |
Sealing the connecting seams, door frame/door
panelling |
3. |
Coat the seam in this area |
4. |
Coat the seam in this area |
5. |
Coat the seam in this area |
|
Tailgate (model L 48)
|
1. |
Sealing the connecting seams, tailgate
frame/panelling |
|
Tailgate (model L 35)
|
1. |
Sealing the connecting seams, tailgate
frame/panelling |
2. |
Coat the seam in this area |
|
Roof (model L 48)
- Cross-sectional view of roof channel
|
1. |
Coat sealing seam in the area of the tailgate |
2. |
Coat sealing seam in this area |
3. |
Sealing the connecting seams, roof/roof frame |
|
Roof (model L 48) (continued)
|
1. |
8 mm free from
sealing compound |
2. |
Coat the sealing seam in the area of the upper
tailgate |
|
Roof (model L 35)
|
1. |
Coat the sealing seam in the area of the upper
tailgate |
|
Front frame longitudinal member, right side
|
1. |
Sealing the connecting seams on the front frame
longitudinal member, right side |
2. |
Sealing the connecting seams on the front frame
longitudinal member, right side |
|
Front frame longitudinal member, left side
|
1. |
Sealing the connecting seams on the front frame
longitudinal member, left side |
2. |
Sealing the connecting seams on the front frame
longitudinal member, left side |
|
Rear frame longitudinal member (model L 48)
|
1. |
Sealing the connecting seams on the rear frame
longitudinal member |
|
Rear frame longitudinal member, left side (model L
35)
|
1. |
Sealing the connecting seams, rear frame
longitudinal member/rear end panel |
2. |
Sealing the connecting seams rear frame
longitudinal member/floor |
|
Rear frame longitudinal member, right side (model
L 35)
- Cross-sectional view, sealing seam
|
1. |
Sealing the connecting seams, rear frame
longitudinal member/rear end panel |
2. |
Sealing the connecting seams rear frame
longitudinal member/floor |
|
A-pillar
|
1. |
Sealing the connecting seam, A-pillar/front
structure |
|
Inside of A-pillar
|
1. |
Sealing the connecting seams, inside of
A-pillar/inside of bulkhead |
2. |
Coat sealing seam in the area of the rubber
seal |
3. |
Sealing the connecting seams, side of floor |
|
Rear inside of floor (model L 48)
|
1. |
No coatings |
2. |
Hole sealed |
3. |
Sealing the connecting seams, rear floor |
4. |
Additional sealant is applied to plug |
5. |
Sealing the connecting seams, rear floor/centre of
floor |
6. |
Hole sealed |
7. |
Coat sealing seams in this area |
|
Rear inside of floor (model L 35)
|
1. |
Sealing the connecting seams, rear floor/rear end
panel |
2. |
Hole sealed |
3. |
Sealing the connecting seams, rear floor/centre of
floor |
4. |
No coatings |
5. |
Sealing the connecting seams rear floor/inside of
side panel |
|
Rear floor (model L 35)
|
1. |
Sealing the connecting seams on rear floor |
|
Rear floor (model L 35) (continued)
- Cross-sectional view of pleat
|
1. |
Sealing the connecting seams, rear floor/sill
panelling |
2. |
Seal mounting holes |
3. |
|
|
|