Replace folding roof control device - L67
Remove
|
2. |
Remove luggage compartment mat
• |
Remove luggage compartment mat (1)
|
|
|
3. |
Detach lock striker panelling (1)
• |
Unscrew 2 x bolt (arrows)
|
|
|
|
4. |
Detach inner panelling of lower rear end panel (1)
• |
Disconnect wiring harness plug (2)
|
|
|
|
|
5. |
Detach tail light - right side
• |
Disconnect wiring harness plug (2)
|
|
|
|
6. |
Detach luggage compartment panelling, side (1) - right side
• |
Detach 4x body-bound rivets (arrows)
|
|
|
7. |
Remove control unit (1)
• |
Unscrew 2x nut (arrows)
|
• |
Release 2x wiring harness plugs (2) and disconnect
|
|
|
|
Install
8. |
Attach control unit
• |
Connect and lock 2x wiring harness plug
|
|
9. |
Attach luggage compartment panelling, side - right side
• |
Install 4x body-bound rivets
|
|
10. |
Attach tail light - right side
• |
Connect wiring harness plug
|
|
11. |
Install inner panelling of lower rear end panel
• |
Connect wiring harness plug
|
|
12. |
Attach lock striker panelling
|
13. |
Install luggage compartment mat
• |
Insert luggage compartment mat
|
|
15. |
Program volatile memories
Note: When replacing
the control unit, after installing the control unit, program with
TECH 2.
|
|