Parcel shelf flap - align or adjust - L67
Adjust
|
1. |
Check parcel shelf flap gap (1)
Note: If the gap does
not agree with that in the table, the following is to be carried
out.
Note: Dimensional data
in millimetres!
|
|
2. |
Open steel folding top
|
3. |
Lift electrical parcel shelf
• |
Close steel cover until the parcel shelf is lifted
|
|
|
4. |
Align parcel shelf flap (1)
Note: Loosen attachment
points only so much that light press allows it to slide.
• |
Align flap and tighten 3x bolts (2) 4.5
Nm
|
|
|
|
5. |
Check parcel shelf flap gap (1)
Note: Repeat the
proceedure if the gap is out of the tolerance.
Note: Dimensional data
in millimetres!
|
|
6. |
Close the parcel shelf using the roof actuating switch
|
|