|
Fixed window on rear door, replace
 Remove
| 2. |
Detach rear door inner panelling 
|
|
| 4. |
Detach water vapour barrier
|
|
| 5. |
Detach inner channel strip
| • |
Pull channel strip carefully from behind beginning at the
top
|
|
|
|
| 6. |
Detach outer channel strip
| • |
Pull channel strip carefully from behind beginning at the
top
|
|
|
|
|
| 7. |
Loosen lower guide rail (3)
|
| 8. |
Detach rear guide rail seal (1)
|
| 9. |
Remove rear guide rail (2)
|
|
| 10. |
Remove fixed rear window
| • |
Remove fixed window from glass pane guide
|
|
Install
| 11. |
Install fixed window
| • |
Install fixed window in glass pane guide
|
|
| 12. |
Install front door rear guide rail
|
| 13. |
Attach rear guide rail seal
|
| 14. |
Tighten rear lower guide rail
|
| 15. |
Attach outer shaft strip
|
| 16. |
Attach inner channel strip
|
| 17. |
Install water vapour barrier
Note: Damaged water
vapour barrier must be replaced.
| • |
Apply adhesive tape to door frame according to the shaded areas
shown.
|
| • |
Cut foil to size
Note: Use removed foil
and door contours as a template
|
| • |
Provide cut-outs for inside handle with bearing supports and,
if available, manual window actuation
|
| • |
Affix water vapour barrier without creases
|
|
| 19. |
Attach rear door inner panelling
|
|
