|
Front Seat Backrest Pad, Replace
 Remove
| 1. |
Detach front seat backrest
|
| 2. |
Detach rotary handle on vehicles with lumbar support
|
| 3. |
Detach armrest on vehicles with armrests
| • |
Fold driver's seat armrest downwards, press armrest cover (1)
to one side, pull out retaining clip (2) forwards
|
|
|
|
| 4. |
Detach active head restraints on vehicles with head restraint
guide sleeves
| • |
Bend standard wire release hook (diameter 1 – 1.5 mm ) for active head restraint
guide sleeve as in illustration I
|
| • |
Mark insertion depth of 50 – 55
mm
|
| • |
Insert release hook opposite the release button of active
headrest guide sleeve, release guide sleeve and pull out
upwards
|
|
|
|
| 5. |
Detach active head restraints on vehicles without head
restraint guide sleeves
| • |
Carefully guide two small slotted head screws on the outer side
of the head restraint guide sleeve until the lugs (I, arrows) are
pressed together
Note: Do not damage
upholstery covering
|
| • |
Pull out head restraint guide sleeve upwards
|
|
|
|
| 6. |
Remove upholstery covering
| • |
Detach upholstery covering from seat frame all the way round
(arrows)
|
| • |
Detach 11x upholstery clamps
|
| • |
Remove upholstery covering
|
|
| 7. |
Replace upholstery pad
|
|
|
Install
| 8. |
Attach upholstery covering to pad
| • |
Position upholstery covering
|
| • |
Attach 11x upholstery clamps
|
|
| 9. |
Install pad with upholstery covering
| • |
Insert pad with upholstery covering
|
| • |
Fasten upholstery covering to seat frame all the way round
|
|
| 10. |
Install headrest guide sleeve
| • |
Push headrest guide sleeve into front seat backrest until it
clicks
|
|
| 11. |
Attach armrest on vehicles with armrests
|
| 12. |
Install rotary handle in vehicles with lumbar support
|
| 13. |
Install front seat backrest 
|
|
