Height Adjustment for Front Seat, Replace
Remove
1. |
Disconnect battery
Note: Wait 1 minute for
airbag to deactivate
|
2. |
Place seat in the most forward position
|
3. |
Detach front seat belt securing panel (1)
|
4. |
Detach seat belt from front seat
|
|
|
5. |
Detach driver's seat, rear
|
6. |
Remove front seat
Note: Disconnect wiring
harness plug.
• |
Remove from the front guide
|
|
|
|
7. |
Detach height adjuster panel
• |
Unclip with a plastic wedge
|
|
8. |
Detach height adjuster
• |
Unscrew 2x bolt (1) and remove lever
|
|
|
|
9. |
Remove rear seat backrest aduster wheel
• |
Unclip with a plastic wedge
|
|
|
10. |
Detach outer panelling
• |
Remove front of panelling from guide (2)
|
|
|
11. |
Remove interior panelling
|
|
|
12. |
Remove central wiring harness plug for seat in vehicles with
heated seats
|
13. |
Uncover wiring harness for seat heating, if fitted
• |
Disconnect and uncover wiring harness plug (arrows)
|
• |
Detach 3x cable tie (1)
|
|
|
|
14. |
Detach belt buckle tensioner
• |
Unscrew bolt (1) and remove belt buckle tensioner from
bracket
|
|
|
|
15. |
Remove front seat backrest
• |
Unscrew 4x bolt (1, 2)
– |
Remove front seat backrest
|
|
|
|
|
|
16. |
Detach seat height adjuster
|
|
Install
17. |
Attach seat height adjuster
|
18. |
Install front seat backrest
|
19. |
Install belt buckle tensioner
• |
Insert belt buckle tensioner in bracket and tighten bolt 35 Nm
Note: Use screw locking
compound
|
|
20. |
Note: For vehicles with
seat heating:
• |
Install wiring harness in seat cushion frame guide
|
• |
Lay wiring harness in central wiring harness plug
– |
Clip in 3x wiring harness in central harness plug
|
– |
Insert wiring harness into grooved tube
|
|
|
21. |
Install interior panelling
|
22. |
Install exterior panelling
|
23. |
Install rear seat backrest aduster wheel
• |
Clip in adjusting wheel
|
|
24. |
Install height adjuster
|
25. |
Install height adjuster panel
|
26. |
Install front seat
• |
Connect wiring harness plug
|
• |
Insert into front guide
|
|
27. |
Attach front seat, rear
|
28. |
Attach front seat seat belt
• |
Tighten bolt 20 Nm
Note: Use screw locking
compound
|
|
29. |
Insert front seat belt securing panel
• |
Place front seat in original position
|
|
31. |
Program volatile memories
|
|