|
Guide sleeves for active head restraint,
Replace
 Remove
| 1. |
Remove head restraint
Note: Damaged head
restraint guide sleeves must be replaced
| • |
Detach head restraint from guide sleeve (1, 2) and remove
upwards
|
|
|
|
| 2. |
Detach active head restraint guide sleeve
| • |
Bend standard wire release hook (diameter 1 – 1.5 mm ) for active head restraint
guide sleeve as in illustration I
|
| • |
Mark insertion depth of 50 – 55
mm
|
| • |
Insert release hook opposite the release button of active
headrest guide sleeve, release guide sleeve and pull out
upwards
|
|
|
|
Install
| 3. |
Install active head restraint guide sleeve
| • |
Push headrest guide sleeve into front seat backrest until it
clicks
|
|
| 4. |
Install headrest
| • |
Engage head restraint with audible click
|
|
|
