Replace rear seat backrest flap - L67
Remove
|
1. |
Remove luggage compartment mat
• |
Remove luggage compartment mat (1)
|
|
|
2. |
Detach steel folding roof protective blind (1)
• |
Unscrew 2x bolts (arrow)
|
|
|
|
|
3. |
Detach inner panelling of top rear panel (1)
• |
Remove 7x body-bound rivets (2)
|
• |
Detach 2x water drain hoses (arrows)
|
|
|
4. |
Move front seat as far forward as possible
|
5. |
Remove bench seat
• |
Unclip 2x from guide (2) upwards
|
|
|
|
6. |
Remove head restraint (1)
• |
Unlock 2x head restraints (arrows)
|
|
|
|
7. |
Detach head restraint guide sleeve
• |
Bend standard wire release hook (diameter 1 – 1.5 mm ) for active head restraint
guide sleeve as in illustration I
|
• |
Mark insertion depth of 50 – 55
mm
|
• |
Insert release hook opposite the release button of active
headrest guide sleeve, release guide sleeve and pull out
upwards
|
|
|
|
8. |
Detach central armrest (1)
• |
Unclip central armrest bracket (2)
|
|
|
|
|
9. |
Detach rear seat backrest
• |
Open 2x service flaps (1)
|
• |
Prise out both clamps (2) with tool KM-443-A
Note: Slightly lift
rear seat back as access is tight.
|
• |
Remove 2x from lower guide (3)
|
|
|
|
10. |
Detach servicing flap covering (1)
• |
Detach 4x body-bound rivets (arrows)
|
|
|
|
11. |
Detach service hatch flap
• |
Detach flap (1) from servicing hatch frame (2)
– |
Remove 2x bolts (arrows)
|
|
|
|
Install
12. |
Attach service hatch flap
• |
Attach flap to servicing hatch frame
|
|
13. |
Attach servicing hatch flap covering
• |
Attach 4x body-bound rivets
|
|
14. |
Attach rear seat backrest
• |
Insert 2x into lower guide
|
• |
Clip in 2x in upper guide
|
|
15. |
Attach central armrest
• |
Clip central armrest bracket
|
|
16. |
Push guide sleeve into rear seat backrest until it engages.
|
17. |
Install headrest
• |
Engage head restraint (audible click)
|
|
18. |
Install bench seat
• |
Clip in 2x front in guide
|
|
19. |
Return front seat to original position
|
20. |
Attach inner panelling of lower rear end panel
• |
Install 7x body-bound rivets
|
• |
Attach 2x water drain hose
|
|
21. |
Attach steel folding roof protective blind
|
22. |
Install luggage compartment mat
• |
Insert luggage compartment mat
|
|
|