Replace rear seat backrest frame - left side (60
percent section) – L69
Remove
1. |
Rear seat backrest frame
|
|
|
2. |
Detach rear seat backrest upholstery covering
|
3. |
Detach armrest
• |
Remove 2x from guide (1)
|
|
|
|
4. |
Detach service hatch flap
|
|
|
5. |
Detach belt guidance system for rear seat backrest frame
(1)
|
|
|
7. |
Detach belt with reel retractor
|
|
|
9. |
Detach release handle panel seat backrest
Note: Access is
tight.
• |
Unclip 2x clips (arrows)
|
|
|
|
10. |
Release rear seat backrest catch
|
11. |
Detach lock, rear seat backrest
• |
4x unclip panelling from lower bolt fastening plate
(arrows)
|
|
12. |
Dispose of remains of rivets
|
|
|
Install
13. |
Attach lock, rear seat backrest
• |
4x clip in panelling of lower bolt fastening plate (arrows)
|
|
14. |
Engage rear seat backrest catch
|
15. |
Attach release handle panel seat backrest
|
16. |
Attach belt with reel retractor
• |
Tighten bolt 35 Nm
Note: Use screw locking
compound
|
|
17. |
Attach belt guidance system for rear seat backrest frame
• |
Tighten 2x bolts
Note: Use screw locking
compound
|
|
18. |
Attach service hatch flap
|
20. |
Attach rear seat backrest upholstery covering
|
|