Replace rear seat backrest upholstery covering -
left side (L69)
Remove
1. |
Left rear seat backrest upholstery covering
|
|
|
2. |
Remove rear seat cushion
• |
Fold down rear seat cushion
|
• |
2x detach rear seat cushion from bracket
|
|
|
|
3. |
Detach rear seat backrest
• |
Unscrew 3x bolts at the front
|
• |
Fold down rear seat backrest
|
• |
Unscrew 2x bolts at the back
|
• |
2x remove from guide at side
|
|
4. |
Remove rear seat backrest assembly
Note: 2nd mechanic
required.
|
|
|
6. |
Detach rear seat backrest
|
|
|
9. |
Detach service hatch frame
|
|
|
10. |
Detach rear seat backrest cover
• |
Remove 8x clips (arrows)
|
|
|
|
14. |
Remove head restraint guide sleeve (1)
Note: Position I shows
the lug to the right of the head restraint guide sleeve which must
be pushed in for removal
• |
Push guide sleeve (1) upwards with a suitable tool (e.g.
pointed pliers ) and compress both lugs (2) upwards with a
screwdriver at the same time
|
• |
Pull guide sleeves upwards off rear seat backrest
|
|
|
|
15. |
Detach belt panel (1)
• |
Unclip and remove panel upwards (2)
|
|
|
|
16. |
Detach upholstery covering all the way round
|
17. |
Remove upholstery covering with pad
• |
Detach upholstery covering at service hatch
|
|
|
|
18. |
Remove upholstery covering
• |
Detach 19x clamps at rear seat
|
• |
Detach 11x clamps at front seat
– |
Remove upholstery covering
|
– |
Completely remove upholstery clamps
|
|
|
|
|
Install
19. |
Attach upholstery covering
• |
Attach 11x clamps at front seat
|
• |
Attach 19x clamps at rear seat
|
|
20. |
Fit upholstery covering with pad
• |
Fasten upholstery covering at service hatch
|
|
21. |
Fasten upholstery covering all the way round
|
23. |
Attach head restraint guide sleeve
• |
2x attach head restraint guide sleeve
|
|
24. |
Attach right bracket
• |
Tighten the bolt
Note: Use screw locking
compound!
|
|
25. |
Attach left bracket
• |
Tighten 2x bolts
Note: Use screw locking
compound!
|
|
26. |
Attach rear seat backrest cover
|
27. |
Attach service hatch frame
|
29. |
Connect rear seat backrest
• |
Tighten 2x bolts
Note: Use screw locking
compound!
|
|
30. |
Insert rear seat assembly
Note: 2nd mechanic
required.
|
31. |
Fasten rear seat backrest
• |
2x insert into guide at side
|
• |
Tighten 2x rear bolts
Note: Use screw locking
compound!
|
• |
Fold down rear seat backrest
|
• |
Insert 3x belt buckles
– |
Tighten 3x bolts at the front 20
Nm
Note: Use screw locking
compound!
|
|
|
32. |
Install rear seat cushions
• |
2x attach rear seat cushion to bracket
|
• |
Fold down rear seat cushion
|
|
|