Replace sun protection for sunroof - L48
Remove
1. |
Remove moulded headlining
|
3. |
Lock sun blind
• |
Manually roll sun blind until the notch (1) is almost vertical
to the sun blind
– |
Place a bolt pin (2) approx. 1 mm thick on the left side in the
notch in order to prevent the rolling open of the sun blind
spring
Note: The sun blind is
blocked and cannot roll open
|
|
|
|
|
4. |
Detach clamping bow
• |
Unscrew 4x bolt and remove clamping bow
|
|
|
|
5. |
Detach sun blind at the rails
|
|
|
6. |
Remove sun blind
• |
Unlock sun blind (90° rotate) and remove
|
|
|
|
Install
7. |
Insert sun blind
• |
Insert sun blind into guide and lock into position
Note: Ensure that the
sun blind cover is correctly placed into the guide (1)
|
• |
Insert sun blind in the guide rails until the stop (2)
|
|
|
|
8. |
Attach sun blind at the rails
|
12. |
Install moulded headlining
|
|