Replace protective trim strip for door (front
door) - L48 / L35 / L70
Remove
1. |
Detach front door protective trim strip
• |
Carefully prise off protective trim strip with a plastic wedge
(1)
|
|
2. |
Remove remaining glue
• |
Remove adhesive residue at the door with a foil remover (2)
Note: Ensure that the
paint is not damaged.
|
|
|
|
Install
|
3. |
Measurements L 48 / L35 / L70
Front clearance
|
Rear clearance
|
Front clearance
|
Horizontal
|
Vertical
|
Vertical
|
I
|
II
|
III
|
169 mm
|
155 mm
|
143 mm
|
|
|
4. |
Remove protective strips from protective trim strip
|
5. |
Attach front door protective trim strip
• |
Align and glue on protective trim strip
|
|
|