vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
B-006 System Selection > < B-004 Programming: Variant Configuration

Astra H

B-005 - Programming Vehicle Identification Number

Test

Work Order Description

Nominal Value
T001

Check: Programming

Select programming dependent on the control unit which has set the trouble code (The control unit is displayed by the TECH 2 ).

ABS/TC/ESP

  • Select the following control unit on the diagnostic tester:
    ABS/TC/ESP

    -

CDC

  • Select the following control unit on the diagnostic tester:
    CDC

    -

CIM

  • Select the following control unit on the diagnostic tester:
    CIM

    -

DIS

  • Select the following control unit on the diagnostic tester:
    DIS

    -

ECC

  • Select the following control unit on the diagnostic tester:
    ECC

    -

ECM

  • Select the following control unit on the diagnostic tester:
    ECM

    -

EHS

  • Select the following control unit on the diagnostic tester:
    EHS

    -

HTC

  • Select the following control unit on the diagnostic tester:
    HTC

-

IPC

  • Select the following control unit on the diagnostic tester:
    IPC

    -

EHU

  • Select the following control unit on the diagnostic tester:
    EHU

    -

PEPS

  • Select the following control unit on the diagnostic tester:
    PEPS

    -

REC

  • Select the following control unit on the diagnostic tester:
    REC

    -

UEC

  • Select the following control unit on the diagnostic tester:
    UEC

    -

UHP (Mobile Phone Portal)

  • Select the following control unit on the diagnostic tester:
    UHP (Mobile Phone Portal)

    -

After programming successfully, check if the system malfunction is still present.

If the malfunction is still present, continue with the following tests:
Yes:





B-006 System Selection > < B-004 Programming: Variant Configuration