vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replace cylinder head cover > < Drive Disc, Remove and Install

Engine cover, remove and install

  Remove

1.   Open bonnet
2.   Remove engine cover (1)
•   Unscrew 2x bolts (4)
•   Unclip engine vent hose from bracket (2)
•   Unscrew oil filler cap (5)
•   Remove engine cover
Note:   Re-attach any retaining rubbers (3) to the engine cover which may have become detached
•   Screw on oil filler cap
Object Number: 8230686  Size: DEFAULT


  Install

3.   Attach engine cover
•   Unscrew oil filler cap
•   Position engine cover
•   Screw on oil filler cap
•   Clip engine vent hose into bracket
•   Tighten 2x bolt 9 Nm
4.   Close bonnet

Replace cylinder head cover > < Drive Disc, Remove and Install