vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replace toothed belt drivewheel > < Engine cover, remove and install

Replace cylinder head cover

  Remove

1.   Open bonnet
2.   Remove engine cover
3.   Detach vacuum line
•   Detach 2x vacuum hose from vacuum line
•   Unscrew 2x bolts (arrows)
Object Number: 2408150  Size: DEFAULT


4.   Detach 2x hose (1) from cylinder housing cover
•   Undo 2 clamps
Object Number: 2408151  Size: DEFAULT


5.   Remove cylinder head cover
•   Unscrew 7x bolt (arrows) in a spiral from the outside inward
Object Number: 2408152  Size: DEFAULT


6.   Remove oil filler cap from cylinder head cover

  Remove

7.   Clean sealing surface
8.   Attach oil filler cap to cylinder head cover
9.   Install cylinder head cover
•   Replace seal
•   Tighten 7x bolt in a spiral from the inside outward 10 Nm
10.   Attach 2x hose to cylinder head cover
•   Attach 2x clamps
11.   Install vacuum line
•   Tighten 2x bolt 9 Nm
•   Attach 2x vacuum hose to vacuum line
12.   Install engine cover
13.   Close bonnet

Replace toothed belt drivewheel > < Engine cover, remove and install