Replace engine damping block (rear)
Remove
2. |
Raise vehicle by its full height
|
3. |
Detach the lower engine cover and right engine splash guard
|
Install
4. |
Remove engine damper block (5)
• |
Remove screw connection (4)
|
|
5. |
Install engine damping block
• |
Tighten new screw connection 55
Nm
Note: Groove (3) must
sit in recess (2)
|
|
|
|
6. |
Install lower engine cover and right engine splash guard
|
7. |
Lower vehicle by its full height
|
|