Check crankshaft bearing clearance (with
plastigage)
Note: Crankshaft
removed
Measure
1. |
Lay on Plastigage
Important: Do not rotate
crankshaft
|
• |
Lay out Plastigage (flexible plastic thread) around the entire
width of the con-rod bearing journal (arrow)
Note: Plastigage is
available via the "Opel/Vauxhall Workshop Equipment" catalogue
|
|
|
|
2. |
Attach crankshaft bearing cap
Note: Note correct
tightening sequence
• |
Tighten 2x bolt 50 Nm + 45° +
15°
Note: The bolts can be
reused for checking crankshaft bearing play.
|
|
3. |
Remove crankshaft bearing cap
|
4. |
Measure crankshaft bearing play
• |
Compare width of flattened plastic thread (arrow) to measuring
scale
Note: When reading the
value, do not confuse millimetres and inches on the measuring
scale
|
• |
Permissible crankshaft bearing play: 0.005 to 0.059 mm
|
|
|
|
|