vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Seal Ring - Camshaft, Replace > < Removing and installing both camshafts

Astra H

Replace engine venting pipe

  Remove

1.   Open bonnet
2.   Remove rear toothed belt cover LUREF_1.gif
3.   Unclip wiring trough from cylinder head cover
4.   Detach engine breather pipe (4) from cylinder head cover
•   Undo quick-release fitting (1)
•   Unclip line
•   Detach quick-release fitting (2) from cylinder head cover
– Detach retaining clamp (3)
Object Number: 9008482 Size: DEFAULT


5.   Remove engine venting pipe
•   Detach vacuum line (4)
– Detach 2x cable ties (1)
– Open insulation
•   Detach quick-release fitting (3) from turbocharger intake pipe
•   Unscrew bolt (2)
Object Number: 9008500 Size: DEFAULT


  Install

6.   Attach engine breather pipe
•   Tighten bolt
•   Attach quick-release fitting to turbocharger intake pipe
•   Attach vacuum line
– Close insulation
– Attach 2x cable ties
7.   Install engine venting pipe
•   Connect quick release fitting
•   Clip in line
•   Attach quick-release fitting to cylinder head cover
– Attach retaining clamp
8.   Install rear toothed belt cover LUREF_1.gif
9.   Close bonnet

Seal Ring - Camshaft, Replace > < Removing and installing both camshafts