Camshaft Adjustment Valves, Replace
Remove
2. |
Place collecting basin underneath.
|
3. |
Unclip wiring harness from cylinder head
|
4. |
Remove 2x valve, camshaft adjustment (3)
• |
Disconnect 2x wiring harness plugs (1)
|
• |
Draw 2x camshaft adjustment valve out of bearing support
|
|
|
|
Install
5. |
Install 2x valve, camshaft adjustment
• |
Insert 2x camshaft adjustment valve as far as the stop
– |
Coat seal rings with clean engine oil
|
|
• |
Connect 2x wiring harness plugs
|
|
6. |
Clip wiring harness on to cylinder head
|
7. |
Check engine oil level and correct if necessary
|
|